Error Code
Fault Description
E11
Difficulty in filling during the wash phase
E21
Difficulties in draining.
E23
Malfunction of drain pump triac.
E24
The sensing circuit of the component (Triac) that controls the drain pump faulty.
E33
Incongruence between the closure of anti-boiling and 1st level contacts of pressure switch
E36
The sensing circuit of anti-boiling pressure switch faulty
E37
Sensing circuit of 1st level pressure switch faulty
E39
HV sensing circuit of anti-overflow pressure switch faulty
E40
Door open, Interlock, wiring or main PCB
E41
Problems with an aperture of the door
E42
Problems with an aperture of the door
E43
Problems with the triac which actions the door interlock
E44
Door closure sensing circuit faulty
E45
Problems with the sensing circuit of the triac that actions the door interlock
E51
Motor power triac short-circuited
E52
No signal from the motor tachometric generator
E52
No signal from the tachometric generator
E53
Problems with the sensing circuit of the triac which powers the motor
E54
Motor relay contacts sticking
E61
Insufficient heating during washing
E62
Overheating during washing
E66
The contacts of the heating element power relay are always closed
E71
NTC washing sensor faulty.
E82
Error in reading the RESET/OFF position of the programme selector.
E83
Error in reading the programme selector code
E93
Incorrect machine configuration.
E94
Incorrect configuration of the washing cycle
E95
Communications error between microprocessor and the EEPROM
E96
Incongruence between control panel version and configuration data
E97
Incongruence between selector version and configuration data
EA1
Drum positioning system (DSP) faulty (top-loaders only)
EB1
Incorrect mains frequency